Supervolt Electronic

10w to 30 w solar street light with mppt charge controller and 30 ah lithium ferro phosphate battery.

cool white solar street light with alumunium die casted fixture. also with IP67 and IP66 rating.

An LED street light is an integrated light that uses light emitting diodes (LED) as its light source. These are considered integrated lights because, in most cases, the luminaire and the fixture are not separate parts. In manufacturing, the LED light cluster is sealed on a panel and then assembled to the LED panel with a heat sink to become an integrated lighting fixture.

Different designs have been created that incorporate various types of LEDs into a light fixture. Either few high-power LEDs or many low-power LEDs may be used. The shape of the LED street light depends on several factors, including LED configuration, the heat sink used with the LEDs and aesthetic design preference.

Heat sinks for LED street lights are similar in design to heat sinks used to cool other electronics such as computers. Heat sinks tend to have as many grooves as possible to facilitate the flow of hot air away from the LEDs. The area of heat exchange directly affects the lifespan of the LED street light.

The lifespan of an LED street light is determined by its light output compared to its original design specification. Once its brightness decreases by 30 percent, an LED street light is considered to be at the end of its life.

Most LED street lights have a lens on the LED panel, which is designed to cast its light in a rectangular pattern, an advantage compared to traditional street lights, which typically have a reflector on the back side of a high-pressure sodium lamp. In this case, much of the luminance of the light is lost and produces light pollution in the air and surrounding environment

Additional Information:

• Item Code: SV12
• Production Capacity: 5000
• Delivery Time: 3 DAYS
• Packaging Details: STANDARD

solar street light with glass model fixtures and inbuilt lithium ion  battery.

mppt charge controller

10w to 30 w solar street light with inbuilt battery and mppt charge controller. 

Solar Street light is a new age and compact lighting solution WITH Solar panels, LED light, Lithium-ion or Lithium Ferro Phosphate LiFePO4 battery, and a PIR motion sensor.solar street lights use solar panel voltage to detect day / night conditions.

Details:

Solar LED lights:
LED stands for light emitting diode. LED comprises of the chemical compound that gives of the light when direct current (DC) from the battery passes through it. Solar LEDs are available from number of companies in different sizes, shapes and styles. The life of LED is usually very high extending up to 50,000 hours. The LEDs require very little current hence the solar panels of smaller sizes are required for the solar lights with LED lamps.

Additional Information:

• Production Capacity: 5000
• Delivery Time: with in week
• Packaging Details: standard

A streetlight is a tall post with a light at the top, which stands by the side of a road to light it up, usually in a town. As the day darkened the streetlights came on

Additional Information:

• Item Code: 8543
• Production Capacity: 5000
• Delivery Time: 3 DAYS
• Packaging Details: STANDRED

All in One Solar Street light is a new age and compact lighting solution combining Solar panels, LED light, Lithium-ion or Lithium Ferro Phosphate LiFePO4 battery, and a PIR motion sensor. All in One solar street lights use solar panel voltage to detect day / night conditions. 

Additional Information:

• Production Capacity: 1000
• Delivery Time: 3 DAYS
• Packaging Details: STANDRED

In order to meet the diverse requirements of our clients, our enterprise is manufacturing, exporting and supplying our clients 9W Luminary Solar Street Light  which is available with us as per following specifications:

Features:

• Long life span
• Optimum brightness
• Easy to install
• Dusk & Dawn Automation,
• Outdoor Application with Boost Converter with constant current & Constant Voltage
• All Kinds of Protection

Specifications:

• Internal Wiring
• Pole/Battery Box/ Mounting Structure
• Autonomy - 1 days

Protections:

Load Short Circuit Protection, Battery Reverse Polarity Protection, Battery Low & Over Charging Protection, Overload Protection, SPV Reverse Polarity Protection

Additional Information:

• Production Capacity: 5000 p.m
• Delivery Time: with in week
• Packaging Details: standrad

Details:

• Lower Operation Cost: It is less expensive to operate a solar powered street light than a traditional street light.
• Compact Design: Our design and technology implementation have been driven by our desire to eliminate the need for bulky external battery boxes and external solar panels and achieve All in One Solar Powered Street Light.
• Reduced Damage/Theft: By locating directly on the light fixture and placing the battery within, the risk of damage, theft or tampering is greatly reduced. There are no wires in the street pole, which means that the wire itself (which exists in regular street lights) cant be stolen and sold for scrap.
• Ruggedized Technology: Require less maintenance and reduced parts replacement due to initially incorporating higher quality components.
• Insect Swarms: The solar powered street light uses LED lighting which does not produce Infrared light, and therefore will not attract insects.
• Improved Safety: The solar powered street light does not require connection to an electrical grid. It is safer and easier to install. In the event of a power outage, the light remains on. This reduces the chance of accidents and the constant light deters theft/vandalism.
• Anywhere/anytime: The solar powered street light can be used in any location. Since no electrical grid is required, it can be installed on buildings, in parking lots, in remote locations simply by hanging it on a pole. 
• Faster Installation: Since you dont need to trench power lines to the pole, run wires up the pole, connect wires to an electrical grid, or hard wire the street light, the installation is significantly faster. In fact, it is so easy, it can be installed on the pole before its erected, and thereby reducing a step completely from the process.

Additional Information:

• Production Capacity: 1000
• Delivery Time: with in week
• Packaging Details: standrad

Details:

Solar LED lights: LED stands for light emitting diode. LED comprises of the chemical compound that gives of the light when direct current (DC) from the battery passes through it. Solar LEDs are available from number of companies in different sizes, shapes and styles. The life of LED is usually very high extending up to 50,000 hours. The LEDs require very little current hence the solar panels of smaller sizes are required for the solar lights with LED lamps.

Additional Information:

• Production Capacity: 5000
• Delivery Time: 7 days
• Packaging Details: standrad

Features:

• All In One Solar Street Light with provision of Ac mains 230V.
• Smart Light Having Features of Solar and Ac street light.
• Reduced backup problem.
• Complete integrated light.
• This smart light comes with all the features of solar street light & Ac street light.
• It is feeded by SPV & AC mains(230V).
• It takes the solar power at priority and charges the battery.
• In case the battery is in low condition,then the light is automatically switched to Ac mains (230V).
•  It helps to glow the light during rainy/ winter season.

Additional Information:

• Production Capacity: 1000
• Delivery Time: 7 days
• Packaging Details: standrad

Supervolt solar street light has embedded solar panel, inbuilt lithium-ion batteries, battery management system, night and motion sensors as well as automatic controls. The fully automatic device comes with LEDs, inbuilt and replaceable Lithium-ion battery and passive infrared (PIR) sensors. A typical solar street light is weather-proof and water-resistant, has low insect attraction rate and low glare and has a longer life.

The embedded solar panel converts solar power into electrical energy which is stored in the inbuilt battery, and used for dusk-to-dawn lighting operations. The main innovation of modern solar street lights is the battery management system which is facilitated by the presence of night and motion sensors.

Additional Information:

• Production Capacity: 5000
• Delivery Time: 7 DAYS
• Packaging Details: STANDARD

An LED street light is an integrated light that uses light emitting diodes (LED) as its light source. These are considered integrated lights because, in most cases, the luminaire and the fixture are not separate parts. In manufacturing, the LED light cluster is sealed on a panel and then assembled to the LED panel with a heat sink to become an integrated lighting fixture.

Different designs have been created that incorporate various types of LEDs into a light fixture. Either few high-power LEDs or many low-power LEDs may be used. The shape of the LED street light depends on several factors, including LED configuration, the heat sink used with the LEDs and aesthetic design preference.

Additional Information:

• Production Capacity: 10000
• Delivery Time: 3 DAYS
• Packaging Details: STANDARD

20 watt solar street light